Always use the paste recommended on the roll label or leaflet. If this is not specific, Albany All Purpose Wallpaper Adhesive is suitable for many wallcoverings and contains a fungicide that's necessary for vinyls and washable papers. Follow the paste manufacturer's instructions carefully, especially when mixing, to ensure the correct consistency.
When applying paste it is important to avoid getting it on the surface of the paper. Any paste on the front should be carefully removed with a damp sponge.
When properly mixed and with the paper face down on the table, start from the top and brush the paste down the length and out towards the edges, herringbone fashion, so that it evenly covers the surface (see fig. 6) Don't pull the brush back across the edge of the paper as it will leave paste on the front of the paper.
Fold the pasted length inwards, bottom to middle and top to middle. To ensure the edges do not curl back and dry out, the folded length can be loosely rolled to hold them together during the soaking period. For very long lengths, fold like a concertina (see fig. 2)
Once pasted all wallcoverings need to 'soak' for a period of time before hanging. This allows the moisture to be absorbed and the paper to fully expand (see about blisters). Always read the manufacturers instructions on the label.
